1 . You come to an intersection displaying a flashing red light. You should:

Come to a full stop and go when it is safe to do so.
Stop only if other cars are also approaching the intersection.
Stop only if other cars are already within the intersection.
Slow down and be prepared to stop, if necessary.

2 . Highway markings:

Are usually not important.
Are only found in construction zones.
Provide information for drivers.
Are usually red and blue in color.

3 . When encountering an aggressive driver, you should:

Avoid eye contact, slow down, and let them pass.
Cut them off to slow them down.
Retaliate by tailgating them.
Make sure they know you disapprove of their behavior.

4 . If a flagger is directing traffic in a construction zone, you must:

Follow the directions given by the flagger.
Copy what surrounding traffic is doing, despite the flagger's instructions.
Assume the flagger is not supposed to be directing traffic.
Follow the laws that would be in place if the area was not under construction.

5 . If you become stranded in a snowstorm, the best thing to do is to:

Get out of the car and go for help.
Lay down in your car and go to sleep.
Walk into the road and get the attention of other drivers.
Stay in the car, as you are most likely to be found when you stay in your vehicle.

6 . A flashing red traffic signal at an intersection has the same requirements as:

A slow sign.
A yield sign.
A stop sign.
An intersection sign.

7 . This sign indicates that:

There is a steep hill ahead.
No trucks are allowed on an upcoming hill.
A logging road is ahead.
There are trucks on an upcoming hill.

8 . To reduce the effects of headlight glare at night, you should look:

Straight ahead.
Over your shoulder.
At the center of the road
To the right edge of the road.

9 . When a vehicle is entering heavy traffic on an interstate:

The entering driver has the right-of-way.
Interstate drivers must wave the entering driver into traffic.
The entering driver must yield to drivers already on the interstate.
The use of signals is not required.

10 . You must stop at a railroad crossing when:

Directed to do so by a flagger.
It is controlled by a stop sign.
Flashing red signals and gates are present and operating.
All of the above.

11 . A solid white line down the center of a two-lane road indicates:

Lanes are moving in opposite directions and drivers are not permitted to pass.
Lanes are moving in opposite directions and drivers are permitted to pass when it is safe to do so.
Lanes are moving in the same direction and drivers are not permitted to pass.
Lanes are moving in the same direction and drivers are permitted to pass when it is safe to do so.
Study tip:

Reduce your study time from hours to minutes with a DMV exam “Cheat Sheet”

99.2% of people who use the cheat sheet pass the FIRST TIME

12 . This sign means:

School ahead.
School crossing.
Pedestrian crossing.
Construction workers on or near the roadway.

13 . When may you proceed through an intersection that has a stop sign but no stop line or crosswalk?

After slowing down to verify that there is no cross traffic
After coming to a complete stop and verifying that it is safe to proceed
After you have stopped at least 20 feet prior to the intersection
After slowing down to a speed of 10 mph

14 . You are driving in the right lane of a multilane highway and want to move into the left lane. You should:

Look in your rearview mirror for traffic behind you before changing lanes.
Look over your left shoulder for traffic in your blind spot before changing lanes.
Look in your side mirror for traffic and turn on your directional signal.
All of the above.

15 . This road sign means:

Sharp right turn.
A road joins from the right.
The road ahead turns sharply right, then sharply left.
Winding road ahead.

16 . Alcohol causes:

Loss of concentration.
Poor coordination.
Slower judgment.
All of the above.

17 . Motorcycles are entitled to:

The bicycle lane.
The same full lane width as other motor vehicles.
Half the width of a lane.
The width of the sidewalk.

18 . This road sign means:

Slow down or stop.
Stop, if necessary.
You must come to a complete stop.
Drive with caution and be ready to stop.

19 . A driver approaching a flashing red traffic signal must:

Slow down at the light.
Drive carefully without stopping.
Merge to the right.
Stop before entering the intersection.

20 . A person's ability to drive can be impaired by:

Alcohol.
Any medication.
A lack of sleep.
All of the above.