1 . You are driving on a divided multilane highway and see or hear the signal of an approaching emergency vehicle. You should:

Disregard the signal if there are other lanes available for the emergency vehicle.
Stop as quickly as you can.
Slow down, move your vehicle to provide a clear path for the emergency vehicle, and stop.
Increase your speed to get out of the way of the emergency vehicle.

2 . When approaching an intersection controlled by a flashing yellow light, you must:

Come to a complete stop at the intersection.
Maintain your normal speed.
Slow down and proceed with caution.

3 . This sign means:

Side road.
Low clearance.
Merging traffic.
Prepare to stop.

4 . It is legal to go faster than the speed limit when passing another vehicle.

True
False

5 . When driving at night, using only your parking lights is unlawful.

True
False

6 . To improve visibility lowered by rain or fog, drivers should use their:

Low beam headlights.
High beam headlights.
Parking lights.

7 . This white sign means you should not pass other vehicles:

Until after you pass the sign.
Unless it seems safe to do so.
For any reason.

8 . When passing other vehicles:

Check your mirrors and blind spots.
Honk your horn at least three times.
Re-enter your lane within 10 feet of the passed vehicle.
There is no need to signal.

9 . A diamond-shaped sign is a:

Road hazard sign.
Interstate route sign.
School crossing sign.
Speed limit sign.

10 . Excessive speed:

Saves time so you can get to your destination more quickly.
Helps you maneuver around obstacles.
Increases the likelihood of serious bodily injury and death.

11 . When approaching an intersection controlled by a traffic signal displaying a flashing yellow arrow, drivers in the proper lane may:

Proceed in the direction of the arrow after coming to a complete stop.
Proceed in the direction of the arrow after yielding to approaching traffic and/or pedestrians.
Proceed in the direction of the arrow while maintaining their speed because they have the right-of-way.
Come to a complete stop and remain stopped until the light turns green.

12 . What is the purpose of rumble strips?

They alert drivers to potential tire problems.
They test a vehicle's shock absorbers.
Through vibration and sound, they alert inattentive drivers to the fact that their vehicles have left the travel lane.

13 . When driving on an interstate:

Stop on the shoulder of the road if you are tired.
You should always use cruise control.
Signal, check mirrors, and check blind spots before changing lanes.
You should change lanes often.
Study tip:

Reduce your study time from hours to minutes with a DMV exam “Cheat Sheet”

99.2% of people who use the cheat sheet pass the FIRST TIME

14 . When passing a bicycle, motorists should provide a space of no less than ____ of clearance.

One foot
Two feet
Three feet
Five feet

15 . This sign means:

A divided highway ends.
A one-way street begins.
A one-way street ends.
A divided highway begins.

16 . A major cause of rear-end collisions in work zones is:

One driver driving at a different speed than surrounding traffic.
The lack of work zone barricades alerting drivers to road maintenance.
Construction equipment obstructing drivers' views.

17 . A major factor contributing to crashes resulting in death and/or serious injury is:

Drivers transporting more than one child at a time.
Drivers driving while under the influence of alcohol or other drugs.
Drivers making frequent stops to rest on long trips.

18 . The most frequent cause of motorcycle accidents is:

The driver of a passenger vehicle failing to yield the right-of-way and making a left turn in front of an oncoming motorcycle.
Inattention by the motorcyclist.
Inadequate road conditions.

19 . If you drive more slowly than the flow of traffic, you will most likely:

Interfere with traffic and receive a ticket.
Improve traffic flow.
Demonstrate defensive driving techniques.

20 . Before passing another vehicle, you should signal:

Just before changing lanes.
At any time.
After changing lanes.
Early enough for others to know your plans.

21 . Don’t follow other cars too closely because:

You may not see the road between the cars.
You may not have time to stop if the vehicle in front of you slows or stops suddenly.
You may not see the vehicle's turn signals.
You may not see the other vehicle’s brake lights.

22 . When approaching a railroad crossing that has no warning signals (such as electric flashing lights or gates), a driver should slow down, look, and listen.

True
False

23 . A steady green traffic light at an intersection means:

Increase your speed.
Adjust your mirrors.
You may continue through the intersection at a safe and reasonable speed, if it is clear to do so.

24 . Signaling your intentions before turning, changing lanes, or driving away from a curb:

Is necessary only if other traffic is present.
Is a good driving habit and is required by law.
Is necessary only during the maneuver, not before.
Is not necessary if the maneuver is done slowly.

25 . Look over your shoulder to check your blind spot when:

Pulling toward or away from a curb.
Turning left or right.
Changing lanes.
All of the above.