1 . Maintain an adequate following distance behind other vehicles:

To allow you time and space to identify and react to hazards.
So you can tailgate.
To allow for traffic counters to accurately count you as a vehicle.
To encourage other drivers to cut you off.

2 . Passing and being passed when riding a motorcycle is not much different than when driving a car. However:

A motorcycle's visibility is more critical than that of a car.
A motorcycle's visibility is not as important as that of a car.
Passing should be done on the shoulder instead of on the main roadway.
It is critical to make eye contact with the other driver when riding a motorcycle.

3 . What does alcohol do to your riding skills and judgement?

It harms both riding skills and judgement.
It helps riding skills but harms your judgement.
It has no effect on either riding skills or judgement.
It has no effect on judgement but it harms riding skills.

4 . When riding on a crowned road, you should:

Use caution and speed up.
Weave among the lane positions.
Turn around and find another route to your destination.
Use caution and slow down.

5 . Motorcycles with engines smaller than 125 cc are:

Not viewed differently than motorcycles with engines larger than 125 cc.
Prohibited from freeways and limited-access highways.
Not permitted on any road.
Used only for short trips.

6 . When you are being passed by another vehicle, which part of the lane should you ride in?

The left
The center
The right
It doesn’t matter.

7 . As weight transfers to the front of your bike while you are braking, you should:

Gradually increase pressure to the front brake.
Use more rear brake pressure.
Not worry. The weight transfer will not have an effect on your motorcycle.
Try to lock the front tire.

8 . The front brake:

Should only be used when you need to stop quickly.
Should be used only under slippery conditions.
Is not as effective as the rear brake.
Is safe to use, if used properly.

9 . What are the four steps to safely completing a turn?

Slow, shift, look, and lurch.
Slow, look, press, and roll.
Press, lean, turn, and grip.
Shift, lean, tuck, and roll.

10 . If your motorcycle is being chased by a dog, you should:

Kick the dog away.
Ride alongside the dog.
Stop until the dog loses interest.
Approach the dog slowly, then speed up.

11 . Shifting to a lower gear produces an effect similar to:

Accelerating.
Braking.
Swerving.
Turning.
Study tip:

Reduce your study time from hours to minutes with a DMV exam “Cheat Sheet”

99.2% of people who use the cheat sheet pass the FIRST TIME

12 . What is the only way to reduce your blood alcohol concentration (BAC)?

Drink coffee.
Allow your body time to get rid of the alcohol.
Exercise.
Eat a large meal.

13 . When the road is slippery, maintain a following distance of at least:

Ten seconds.
Five seconds.
Three seconds.
One second.

14 . You should do all of the following to lesson your chances of being in a crash, except:

Be visible by wearing proper clothing and using your headlight.
Communicate your intentions by using your turn signals and brake light.
Search for hazards in your path.
Hope the other drivers see you.

15 . If your front wheel begins to skid, you should:

Keep the front brake engaged and ride out the skid.
Keep the front brake engaged and release the rear brake.
Immediately release and re-engage the front brake.
Release the front brake and increase the pressure on the rear brake.

16 . When traveling in a work zone, a motorcyclist should be especially aware of:

Loose gravel and dirt.
Wet tar.
Uneven, temporary pavement.
All of the above.

17 . You should check your motorcycle's fluid levels:

At least once a week.
At least twice a year.
At least once a year.
Before every ride.

18 . How do headache, cold, and hay fever medications usually affect your body?

They make you drowsy.
They make you more alert.
They make you hungry.
They make you unable to concentrate.

19 . During the day, your headlight should:

Not be used.
Be used on its high beam setting.
Be used on its low beam setting.
Alternate between high beam and low beam settings.

20 . When entering a turn, a rider should:

Speed up.
Reduce their speed.
Move their shoulders to match the angle of the turn.
Sit up as high as possible.