1 . You will get the most protection from a helmet if it is all of the following, except:

U.S. DOT-compliant.
Loose-fitting.
Free of defects.

2 . You should do a pre-ride inspection:

Before every ride.
About once every 10 rides.
Once a month.
Once a season.

3 . When choosing a lane position, you should consider:

Whether or not other drivers will see you.
How many cars are on the road ahead.
Which portion of the lane will result in a shorter trip.
If you can pass more vehicles in a certain position than in another.

4 . When both braking and swerving must be done to avoid an unexpected hazard, a rider should:

Perform one action, then the other.
Perform both actions at the same time and apply extra braking pressure.
Perform both actions at the same time, but mainly focus on swerving.
Not perform either action.

5 . As you approach a blind intersection, you should:

Move into the part of the lane that allows other drivers to most easily see you.
Move into the part of the lane closest to the traffic control device.
Move into the outside edge of the lane.

6 . The gearshift lever is operated by:

Your right hand.
Your right foot.
Your left hand.
Your left foot.

7 . How is the accelerator controlled?

With the right hand
With the left hand
With the right foot
With the left foot

8 . If you are being chased by a dog, you should:

Approach the animal slowly, then speed up.
Kick it away.
Swerve around the animal.

9 . When applying the front brake, you should:

Apply the lever by squeezing firmly and progressively.
Grab at the brake with only two fingers.
Press down on the brake lever with your foot.
Stomp on the brake lever.

10 . When planning a long group ride, which of the following ideas should not be implemented?

The lengths of travel segments should be based on the least experienced rider.
Breaks should be minimized so the riders can get to their destination as soon as possible.
Inexperienced riders should be placed behind the leaders.
The group should maintain a staggered riding formation.

11 . When slowing down or stopping, you must:

Shift down through the gears.
Shift up through the gears.
Shift into neutral.

12 . This sign means:

Winding road ahead.
Do not enter.
Pedestrian crossing.

13 . This road sign means:

You are about to enter a one-way street from the wrong direction.
U-turns are prohibited.
You may proceed if the way is clear.
Come to a complete stop before proceeding.
Study tip:

Reduce your study time from hours to minutes with a DMV exam “Cheat Sheet”

99.2% of people who use the cheat sheet pass the FIRST TIME

14 . When approaching an intersection, a motorcyclist should not:

Choose a lane position that increases their visibility.
Speed up to cross the intersection quickly.
Cover the clutch and brakes to reduce their reaction time.

15 . If you cannot avoid a slippery road, you should:

Lean into the slippery section to maintain your balance.
Maintain your speed to improve traction.
Not worry about the road conditions.
Keep your motorcycle upright and proceed as slowly as needed.

16 . Before starting a turn, a motorcyclist should change gears to:

Prevent a change in power in the middle of the turn.
Be able to keep both hands on the handle grips during the turn.
Prevent the motorcycle from slowing down.

17 . If your drive chain breaks, you:

Should hold the chain in place.
Can continue safely riding.
Will notice a loss of power to the rear wheel.
Should remember to fix the belt on your next stop.

18 . You’ll have a better chance of avoiding serious injury if you wear all of the following, except:

A DOT-approved helmet.
Face or eye protection.
Ear buds.
Protective clothing.

19 . As you accelerate, you should:

Shift up to a higher gear.
Shift down to a lower gear.
Remain in your first gear.

20 . This sign means:

School zone or crossing.
Pedestrian crossing.
Railroad ahead.

21 . What should a motorcyclist do to prevent possible injury when riding on a slippery surface?

Increase their speed.
Reduce their speed.
Make sudden moves.
Ride on the shoulder.

22 . When passing, you:

Should ride within the speed limits.
Should decelerate.
May ride 10 mph above the maximum speed limit.
May ride 15 mph above the maximum speed limit.

23 . A rider's boots or shoes should:

Be below their ankles.
Cover their ankles.
Be made of a soft, pliable material.

24 . When riding in a group, inexperienced riders should position themselves:

Just behind the leader.
In front of the group.
At the rear of the group.
Beside the leader.

25 . Riding on ______ may provide poor traction.

Pavement markings
Dry pavement
The roadway under a bridge