1 . This road sign means:

Do not enter.
No parking.
No U-turn.

2 . A large truck is ahead of you and is turning right onto a street with two lanes in each direction. The truck:

May complete its turn in either of the two lanes.
May have to swing wide to complete the right turn.
Must stay in the right lane at all times while turning.

3 . This road sign means:

Drive with caution and be ready to stop.
You must come to a complete stop.
Stop, if necessary.

4 . You should always travel:

At the speed of vehicles surrounding you.
At the speed limit.
At a speed appropriate for road and weather conditions.

5 . Sudden wind gusts on highways:

Generally affect only the movement of large vehicles.
Only cause visibility problems.
Can cause problems for all vehicles.

6 . This sign means:

One-way traffic.
Intersection ahead.
Merging traffic from the right.

7 . This sign means:

There is a 35 mph speed zone after the curve ahead.
Drive no slower than 35 mph around the upcoming curve.
Approach the upcoming curve at a speed of 35 mph or slower.

8 . This sign means:

Pedestrians walking along the road ahead.
Pedestrian crossing ahead.
Pedestrians must not cross here.

9 . Work zone barriers, drums, cones, and signs are used to:

Make drivers angry about slow traffic.
Inconvenience drivers.
Keep traffic out of hazardous work zones.

10 . If you drive faster than other vehicles on a road with one lane moving in each direction and continually pass the other cars, you will:

Get you to your destination much more quickly and safely.
Increase your chances of an collision.
Help prevent traffic congestion.

11 . If you experience a tire blowout:

Tap or pump the brakes.
Slow down gradually and use your brakes lightly.
Apply the brakes firmly and quickly.

12 . Which statement is true?

You should put on your cruise control near a railroad crossing to maintain a constant speed.
You must stop at a railroad crossing when directed to do so by a flagger or stop sign.
You have the right-of-way at a railroad crossing and do not need to stop.

13 . This symbol is used for:

Dangerous intersections.
Slow-moving vehicles.
Yield signs.

14 . This sign means:

Do not drink and drive.
Slippery when wet.
Road curves ahead.

15 . A distraction when driving is:

Anything that causes evasive action while driving.
Anything that takes your attention away from driving.
Anything that causes you to pay more attention to driving.

16 . When approaching an intersection controlled by a flashing yellow light, you must:

Come to a complete stop at the intersection.
Maintain your normal speed.
Slow down and proceed with caution.
Study tip:

Reduce your study time from hours to minutes with a DMV exam “Cheat Sheet”

99.2% of people who use the cheat sheet pass the FIRST TIME

17 . You are merging onto an interstate highway. You should:

Select a safe gap and merge into the lane of traffic.
Merge across two lanes at once.
Always stop before entering the highway.

18 . This sign means:

School zone or crossing.
Pedestrian crossing.
Railroad ahead.

19 . When driving in work zones, you should:

Increase your speed to get through the zone as quickly as possible.
Reduce your speed and be prepared to stop suddenly.
Maintain your normal speed the whole way through the zone.

20 . Where is it safe to pass another vehicle?

Within an intersection where there are no oncoming vehicles
Wherever signs and/or pavement markings permit passing
Within a curve where there are no oncoming vehicles

21 . A diamond-shaped sign means:

Yield.
Stop.
Warning.

22 . You may pass a vehicle when:

You are on a hill or curve.
You are on a road with a solid line next to your lane.
You are on a road with a broken line next to your lane.

23 . If bad weather makes it difficult for you to see clearly, you should:

Speed up to get off the road quickly.
Drive in the lane closest to oncoming traffic.
Increase your following distance.

24 . If you are driving near a large commercial vehicle, you should:

Follow the large vehicle closely to reduce wind drag on your vehicle.
Avoid driving beside it for long stretches of time.
Drive on its right side when on curves and hills.

25 . When you see a flashing yellow light at an intersection, you should:

Yield to all traffic before crossing the intersection.
Stop, then enter the intersection when it is safe to do so.
Slow down and cross the intersection carefully.

26 . A broken yellow line beside a solid yellow line indicates that passing is:

Permitted from the side next to the solid yellow line.
Not permitted from either direction.
Permitted from the side next to the broken yellow line.

27 . Delaware law does not say who has the right-of-way. It says:

Who must yield the right-of-way.
Nothing about the right-of-way.
Right-of-way does not exist.

28 . This sign means:

No U-turn.
Traffic signal ahead.
Railroad ahead.

29 . Roads are slippery after it first starts to rain. When the road is slippery, you should:

Avoid making turns and stops while driving at high speeds.
Test your tires' traction while going uphill.
Decrease the distance you look ahead of your vehicle.

30 . Which lane must you be in before making a left turn from a one-way street?

The lane nearest the left curb.
The lane nearest the center of the street.
The lane nearest the right curb.