1 . During a basic vehicle control skills test, what is considered an encroachment?

The vehicle crossing over an exercise boundary line.
A driver executing a single pull-up.
A driver placing the vehicle in neutral and applying the parking brake.
The vehicle stalling while the driver shifts gears.
Click Here
Full Cheat Sheet

2 . When making a stop to pick up students, a driver should ensure all surrounding traffic has stopped before:

Opening the door and signaling for students to approach the bus.
Turning on the alternating red lights.
Pulling over to the side of the road.
Braking.
Take a FREE Practice Test Now

3 . School buses:

Are never equipped with ABS.
Are only equipped with ABS if students who are younger than 10 years of age will be on the bus.
May be equipped with ABS.
Take a FREE Practice Test Now

4 . If a school bus stalls on a railroad track:

Students should remain on the bus.
Students should be evacuated to a location near the bus.
Students should be evacuated and moved away from the bus.
Take a FREE Practice Test Now

5 . The overhead rearview mirror is located:

On the outside left of the bus.
On the outside right of the bus.
Above the windshield inside the bus.
Click Here
Full Cheat Sheet

6 . When taking the on-road driving test, you will be evaluated on your lane usage. Which of the following is an example of poor lane usage?

Not driving over curbs or sidewalks
Stopping behind crosswalks
Driving in the leftmost lane if more than one driving lane is available
Finishing a right turn in the rightmost lane
Take a FREE Practice Test Now

7 . As students exit a school bus, the driver should watch to ensure that they:

Are leaving in pairs.
Do not get caught on the handrail or door.
Do not talk while exiting.
Take a FREE Practice Test Now

8 . When driving through a curve during the skills test, you should:

Veer from your lane if needed to complete the curve.
Reduce your speed after entering the curve.
Refrain from looking for other vehicles while turning.
Reduce your speed before entering the curve.
Take a FREE Practice Test Now

9 . Before evacuating a bus in response to a hazard, a driver should:

Ask the students if they want to leave.
Explain the hazard to the dispatcher and make a decision on how to respond.
Tell students to panic.
Have students open all the windows.
Click Here
Full Cheat Sheet

10 . An encroachment is when:

A driver does not appear for their scheduled basic skills test.
A vehicle touches an exercise boundary line during the basic skills test.
A driver fails one section of the basic skills test.
Take a FREE Practice Test Now

11 . A bus driver approaching a bus stop should stop at least 10 feet away from waiting students because:

The students will have to walk to the bus, making it easier to see their movements.
Buses are difficult to drive.
The students may get scared of the bus coming toward them.
Take a FREE Practice Test Now
Study tip:

Reduce your study time from hours to minutes with a DMV exam “Cheat Sheet”

99.2% of people who use the cheat sheet pass the FIRST TIME

Click Here
Full Cheat Sheet

12 . During the skills test, if making a turn that requires a stop, you should:

Skid to a stop.
Stop after the stop line to get a better view.
Allow your vehicle to roll.
Keep the front wheels aimed straight ahead.
Take a FREE Practice Test Now

13 . If a school bus needs to be evacuated, passengers should :

Always exit through the rear door.
Use the exit deemed safest.
Always exit through the front door.
Click Here
Full Cheat Sheet

14 . When operating a school bus, mirrors should be adjusted:

During the drive.
Before beginning to drive.
After the drive is completed.
Take a FREE Practice Test Now

15 . To safely unload a bus, students should:

Remain seated until they are told to exit.
Stand up and head toward the door while the bus is slowing down.
Exit the bus and stand directly next to the bus while it is being driven away from the stop.
Take a FREE Practice Test Now

16 . When inspecting engine compartment belts during the vehicle inspection test:

The belts should be checked for snugness, each with up to three inches of play.
The water pump belt does not need to be identified.
The air compressor belt should be removed.
The applicant must identify which items are not belt-driven, if any.
Take a FREE Practice Test Now

17 . A properly adjusted flat mirror should allow the driver to see:

The rear tires touching the ground.
The front tires touching the ground.
Only the roadway and no parts of the bus.
The front bumper.
Click Here
Full Cheat Sheet

18 . What should properly adjusted outside side flat mirrors on a school bus allow the driver to see?

The sides of the school bus
Under the school bus
The front tires touching the ground
Vehicles in front of the bus
Take a FREE Practice Test Now

19 . When performing a pre-trip inspection, you should make sure that:

The pedal surface has been smoothed out.
The gas pedal sticks.
Nothing is obstrucing the pedals.
There is something underneath the brake pedal.
Take a FREE Practice Test Now

20 . Pre-trip inspections should be done:

Differently each time in order to place emphasis on different items.
The same way each time to prevent you from forgetting anything.
Once in a while.
Take a FREE Practice Test Now